|
Conventional Termite Control Methodology
A "barrier", as used by convention in most text I have read implies a special material called a termiticide that is mixed homogeneously with the soil particles to form a "bond" with each particle to form a barrier that subterranean termites can't penetrate to enter your house.
A good termiticide has a special "binder" material that bonds it tightly to each spoil particle so it will not move in the soil profile and move offsite, possibly contaminating nearby bodies of water or be taken up by plants we eat.
Many different products that meet this criteria are manufactured and used by each company providing the termite control service to you.
The importance of selecting a good termiticide is critical to the homeowner, albeit he is most likely the least qualified to make the selection. A good temiticide persists in the soil for a good length of time and does not move in the soil profile. A good termite applicator makes sure the termiticide is mixed properly and is applied at the correct volumes and manner in which to insure it performing correctly.
Be careful in your selection of a termite company to perform the protection of your most expensive asset! Two areas that termite companies can make more money is:
MIXING THE CHEMICAL
If the mixture is not measured and mixed in the exact volumes, it will not provide the correct degree of protection to the homeowner and, if less termiticide is used....well this means that the cost to the termite company is less. This means the termite treating company will make more money!
TREATING THE SOIL CORRECTLY
If he doesn't dig the appropriate sized trench and drill the appropriately spaced holes through the concrete, he will again save money for him and slight you in the treatment!
Please be careful! Trust...but verify!
|
